Cleaning the jets "Jinn"
For cleaning and checking of electromagnetic gasoline, gas injectors, direct injection injectors. The technology of cleaning the injectors "Jinn" - resonant cleaning with the magnetization reversal of the injector is used. To date, the "Jinn" is the only stand with feedback from the nozzle, the moment of opening the nozzle is controlled to prevent the impact from closing, the optimal mode is automatically selected, which eliminates damage to the injector, increases the cleaning effect, saves operator time. In the automatic mode of cavitation cleaning, to protect the nozzles from rivelling the saddle, the opening time is set programmatically within 0.5 - 1.3 ms, no more than 30% of the minimum operating impulse in the car, constantly monitored during cleaning. The mode "Demagnetization" and "Cleaning" with magnetization reversal allows you to remove magnetic debris from inside the nozzle, which disrupts its normal operation. The reason for the nozzle leakage is often caused by this garbage. Unique function of checking "mechanical properties" without an external piezoelectric sensor-determination of the minimum time of the nozzle opening pulse. Stroboscopic torch lighting in the dynamic sub-modes "Flow". Has the functions of checking the executive mechanisms of the car: regulators and idle valves, gasoline pumps.