STAND FOR DIAGNOSTICS AND CLEANING OF ELECTROMAGNETIC INJECTORS OF A CAR PETROL INTERNAL COMBUSTION ENGINE
The area of technology to which the product belongs. The product refers to devices for diagnostics and cleaning of fuel-injection equipment of systems for supplying combustible mixtures or their components to internal combustion engines (ICE), in particular, to stands for diagnostics and cleaning of gasoline electromagnetic injectors in a wide range of pressures and can be used at service centers and service stations.
Prerequisites for product creation. Currently, cars with gasoline engines are produced exclusively by injection, where fuel injection into the combustion chamber is provided by electromagnetic injectors installed one or two for each cylinder (direct injection).
The working pressure of modern injectors is: - for FSI injectors - 49 - 150 bar; - for piezo brand injectors - 49 - 150 bar; - for TSI brand injectors - 49 - 150 bar; - for a injectors of the MPI brand - 3 - 4 bar;
During the operation of the car, the injectors become clogged with small solid particles that cannot be captured by the fuel filter, as well as with resin molecules present in gasoline.
In addition, since the injector is in a direct current electromagnetic field during operation, its metal parts are magnetized and attract ferromagnet microparticles circulating in the vehicle's fuel system. Clogged injectors are felt after 20-30 thousand km. mileage of the car.
During operation, the injectors can be damaged. There are cases when injectors come with a defect directly from the manufacturer and either do not work at all, or do not provide the required fuel throughput.
When the injectors are clogged, or when defective injectors are used, the fuel injection into the cylinder is uneven, or the injectors fail altogether and one or more cylinders stop working. To restore reliable engine operation, it is necessary to diagnose the injectors and determine whether the injector is defective and must be replaced, or if it is dirty and can be cleaned and further operated.
High pressure bench SVD:
-stand for 6 injectors of the type: Piezo, FSI, GDI, CDI, MPI
The stand consists of a body, a block of graduated cylinders and a ramp.
The ramp is designed to install inspected injectors using a clamping plate and fasteners. Replaceable sockets are available for different types of injectors.
On the front panel are located:
- pressure gauge in the system 0-150 bar.
- control panel for operating modes with a touch screen.
- button for draining the working fluid from the measuring cylinders into the tank.
During the quarantine period, deliveries are made worldwide. National carrier, delivery time is 14-40 days. Or EMS (Express Mail Service) - a service of accelerated international delivery, delivery time is 7-10 days, the cost of such delivery: Russian Federation - $ 240, Moldova - $ 180, Kazakhstan - $ 220, Georgia - $ 210, Belarus - $ 190 ... If your country is not on the list, write to us, we will clarify the cost of EMS delivery to your city.