"DjinnX" is intended for use in cleaning and testing stands of injectors.
- stand with feedback from the injector, controlled by the moment of
opening the injector to prevent blows during closing, the optimal mode is
automatically selected, which eliminates damage to the injector, increases
the cleaning effect, saves operator time. The
"Degaussing" and "Cleaning" mode with magnetic reversal allows you to
remove magnetic debris inside the injector, which disrupts its normal
operation. The cause of a injector leak is often caused precisely by the presence of such garbage.
Automatic cleaning mode - maximum cavitation. The control of the opening degree eliminates the possibility of the needle hitting the injector. Free firmware update of the stand control module.
The body and piping are made of stainless steel.
Resistance of injectors 0.8-20 Ohm System pressure up to 10 bar Pipelines of liquid from stainless steel. Relief valve-air supply. Illumination-strobe. Stainless steel tank 0.8 l Dimensions (SHVD): 420h380h160 Weight 9 kg. Warranty 24 months
Completeness: - stand - clamping bar - inserting the clamping bar - reception cups 4 pcs. - graduated cylinder 1 pc. - latches 4 pcs. - Blanking plugs 3 pcs. - air hose - watering can - network power cable
more detail you can familiarize yourself with the information about the
possibilities in the documentation by going to the blog or by asking a
question personally to the developer:+38(063)8151000 (Telegram, WhatsApp, Viber, Signal).